Organic Photo-antimicrobials: Principles, Molecule Design, and Applications.

The emergence of multi-drug-resistant pathogens threatens the healthcare systems world-wide. Recent advances in phototherapy (PT) approaches mediated by photo-antimicrobials (PAMs) provide new opportunities for the current serious antibiotic resistance. During the PT treatment, reactive oxygen species or heat produced by PAMs would react with the cell membrane, consequently leaking cytoplasm components and effectively eradicating different pathogens like bacteria, fungi, viruses, and even parasites. This Perspective will concentrate on the development of different organic photo-antimicrobials (OPAMs) and their application as practical therapeutic agents into therapy for local infections, wound dressings, and removal of biofilms from medical devices. We also discuss how to design highly efficient OPAMs by modifying the chemical structure or conjugating with a targeting component. Moreover, this Perspective provides a discussion of the general challenges and direction for OPAMs and what further needs to be done. It is hoped that through this overview, OPAMs can prosper and will be more widely used for microbial infections in the future, especially at a time when the global COVID-19 epidemic is getting more serious.

Plant-derived nanotherapeutic systems to counter the overgrowing threat of resistant microbes and biofilms.

Since antiquity, the survival of human civilization has always been threatened by the microbial infections. An alarming surge in the resistant microbial strains against the conventional drugs is quite evident in the preceding years. Furthermore, failure of currently available regimens of antibiotics has been highlighted by the emerging threat of biofilms in the community and hospital settings. Biofilms are complex dynamic composites rich in extracellular polysaccharides and DNA, supporting plethora of symbiotic microbial life forms, that can grow on both living and non-living surfaces. These enforced structures are impervious to the drugs and lead to spread of recurrent and non-treatable infections. There is a strong realization among the scientists and healthcare providers to work out alternative strategies to combat the issue of drug resistance and biofilms. Plants are a traditional but rich source of effective antimicrobials with wider spectrum due to presence of multiple constituents in perfect synergy. Other than the biocompatibility and the safety profile, these phytochemicals have been repeatedly proven to overcome the non-responsiveness of resistant microbes and films via multiple pathways such as blocking the efflux pumps, better penetration across the cell membranes or biofilms, and anti-adhesive properties. However, the unfavorable physicochemical attributes and stability issues of these phytochemicals have hampered their commercialization. These issues of the phytochemicals can be solved by designing suitably constructed nanoscaled structures. Nanosized systems can not only improve the physicochemical features of the encapsulated payloads but can also enhance their pharmacokinetic and therapeutic profile. This review encompasses why and how various types of phytochemicals and their nanosized preparations counter the microbial resistance and the biofouling. We believe that phytochemical in tandem with nanotechnological innovations can be employed to defeat the microbial resistance and biofilms. This review will help in better understanding of the challenges associated with developing such platforms and their future prospects.

The suitability of a glovebox and of a covered still air box design for semi-sterile applications in environmental monitoring.

Laminar flow cabinets (LFCs) ensure a safe working space within which product manipulation can be carried out safely excluding contaminations of the product with the environmental microorganisms. However, for environmental monitoring applications mobile laboratories are required and these prefer the lighter gloveboxes (GB; restricted arm movement) or still air boxes (SAB; free arm movement) over the heavier, more expensive LFCs, which need to be regularly maintained. Nevertheless, the efficiency of simple GBs/SABs (no HEPA filter), in providing semi-sterile working conditions has yet to be clearly defined. Consequently, our aim was to assess the suitability of GBs/SABs for semi-sterile applications by using passive and active bioaerosol sample collection procedures within the interior spaces of these boxes. Prior to sample collection the boxes were pre-treated with different spraying preparations (70% ethanol, 2% detergent or sterile water). For a greater restriction of bioaerosol entry, SABs were constructed with covered arm ports and these were classified as partially covered (SABPC) and completely covered SABs (SABCC). Results showed that ethanol sprayed GB and SABCC exhibited microbial aerosol colony counts of zero after one hour of passive sample collection, and active sample collection revealed counts ranging between 1.9 (for GB) - 2.3 Log10CFU/m3 (for SABCC). However, ethanol sprayed SAB and SABPC were ineffective having colony counts of 6.9 and 6.5 Log10CFU/m3, respectively. Other spraying regimes resulted in even higher colony counts (up to 7.3 Log10CFU/m3). Therefore, the ethanol sprayed GB and SABCC could effectively be used for semi-sterile applications, with the SABCC allowing for an unrestricted arm movement within it.

Streptomyces sp.-A Treasure Trove of Weapons to Combat Methicillin-Resistant Staphylococcus aureus Biofilm Associated with Biomedical Devices.

Biofilms formed by methicillin-resistant S. aureus (MRSA) are among the most frequent causes of biomedical device-related infection, which are difficult to treat and are often persistent and recurrent. Thus, new and effective antibiofilm agents are urgently needed. In this article, we review the most relevant literature of the recent years reporting on promising anti-MRSA biofilm agents derived from the genus Streptomyces bacteria, and discuss the potential contribution of these newly reported antibiofilm compounds to the current strategies in preventing biofilm formation and eradicating pre-existing biofilms of the clinically important pathogen MRSA. Many efforts are evidenced to address biofilm-related infections, and some novel strategies have been developed and demonstrated encouraging results in preclinical studies. Nevertheless, more in vivo studies with appropriate biofilm models and well-designed multicenter clinical trials are needed to assess the prospects of these strategies.

Risk factors and biofilm formation analyses of hospital-acquired infection of Candida pelliculosa in a neonatal intensive care unit.

BACKGROUND: Candida pelliculosa is an ecological fungal species that can cause infections in immunocompromised individuals. Numerous studies globally have shown that C. pelliculosa infects neonates. An outbreak recently occurred in our neonatal intensive care unit; therefore, we aimed to evaluate the risk factors in this hospital-acquired fungal infection. METHODS: We performed a case-control study, analysing the potential risk factors for neonatal infections of C. pelliculosa so that infection prevention and control could be implemented in our units. Isolated strains were tested for drug resistance and biofilm formation, important factors for fungal transmission that give rise to hospital-acquired infections. RESULTS: The use of three or more broad-spectrum antimicrobials or long hospital stays were associated with higher likelihoods of infection with C. pelliculosa. The fungus was not identified on the hands of healthcare workers or in the environment. All fungal isolates were susceptible to anti-fungal medications, and after anti-fungal treatment, all infected patients recovered. Strict infection prevention and control procedures efficiently suppressed infection transmission. Intact adhesin-encoding genes, shown by genome analysis, indicated possible routes for fungal transmission. CONCLUSIONS: The use of three or more broad-spectrum antimicrobials or a lengthy hospital stay is theoretically associated with the risk of infection with C. pelliculosa. Strains that we isolated are susceptible to anti-fungal medications, and these were eliminated by treating all patients with an antifungal. Transmission is likely via adhesion to the cell surface and biofilm formation.

Varied-shaped gold nanoparticles with nanogram killing efficiency as potential antimicrobial surface coatings for the medical devices.

Medical device-associated infections are a serious medical threat, particularly for patients with impaired mobility and/or advanced age. Despite a variety of antimicrobial coatings for medical devices being explored to date, only a limited number have been introduced for clinical use. Research into new bactericidal agents with the ability to eradicate pathogens, limit biofilm formation, and exhibit satisfactory biocompatibility, is therefore necessary and urgent. In this study, a series of varied-morphology gold nanoparticles in shapes of rods, peanuts, stars and spherical-like, porous ones with potent antibacterial activity were synthesized and thoroughly tested against spectrum of Candida albicans, Pseudomonas aeruginosa, Staphylococcus aureus clinical strains, as well as spectrum of uropathogenic Escherichia coli isolates. The optimization of gold nanoparticles synthesis allowed to develop nanomaterials, which are proved to be significantly more potent against tested microbes compared with the gold nanoformulations reported to date. Notably, their antimicrobial spectrum includes strains with different drug resistance mechanisms. Facile and cost-efficient synthesis of gold nanoparticles, remarkable bactericidal efficiency at nanogram doses, and low toxicity, underline their potential for development as a new coatings, as indicated by the example of urological catheters. The presented research fills a gap in microbial studies of non-spherical gold nanoparticles for the development of antimicrobial coatings targeting multidrug-resistant pathogens responsible for device-associated nosocomial infections.

Genomic diversity and characterization of Listeria monocytogenes from dry-cured ham processing plants.

Genomic diversity of Listeria monocytogenes isolates from the deboning and slicing areas of three dry-cured ham processing plants was analysed. L. monocytogenes was detected in 58 out of 491 samples from the environment and equipment surfaces, all from the deboning area, with differences in prevalence among facilities. The most frequent PCR-serogroup was IIa (74.1%) followed by IIb and IIc, and only one isolate was serogroup IVb. Twenty different pulsotypes and 11 sequence types (STs) grouped into 10 clonal complexes (CCs) were determined. ST121 (CC121) and ST9 (CC9) were the most abundant. Premature stop codons (PMSC6 and PMSC19) associated with attenuated virulence were found in the inlA sequence in 7 out of 12 selected strains. CC121 strains were strong biofilm formers and some harboured the transposon Tn6188, related with increased tolerance to quaternary ammonium compounds. L. monocytogenes clones considered hypovirulent resulted predominant in the deboning areas. The clonal structure and potential virulence of the isolates could help to establish adequate control measures and cleaning protocols for the comprehensive elimination of the pathogen in dry-cured ham processing environment.

Exploiting Generative Design for 3D Printing of Bacterial Biofilm Resistant Composite Devices.

As the understanding of disease grows, so does the opportunity for personalization of therapies targeted to the needs of the individual. To bring about a step change in the personalization of medical devices it is shown that multi-material inkjet-based 3D printing can meet this demand by combining functional materials, voxelated manufacturing, and algorithmic design. In this paper composite structures designed with both controlled deformation and reduced biofilm formation are manufactured using two formulations that are deposited selectively and separately. The bacterial biofilm coverage of the resulting composites is reduced by up to 75% compared to commonly used silicone rubbers, without the need for incorporating bioactives. Meanwhile, the composites can be tuned to meet user defined mechanical performance with ±10% deviation. Device manufacture is coupled to finite element modelling and a genetic algorithm that takes the user-specified mechanical deformation and computes the distribution of materials needed to meet this under given load constraints through a generative design process. Manufactured products are assessed against the mechanical and bacterial cell-instructive specifications and illustrate how multifunctional personalization can be achieved using generative design driven multi-material inkjet based 3D printing.

Development of a high-level light-activated disinfectant for hard surfaces and medical devices.

BACKGROUND: Bacterial spores are an important consideration in healthcare decontamination, with cross-contamination highlighted as a major route of transmission due to their persistent nature. Their containment is extremely difficult due to the toxicity and cost of first-line sporicides. METHODS: Susceptibility of Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa and Escherichia coli to phenothiazinium photosensitizers and cationic surfactants under white- or red-light irradiation was assessed by determination of minimum inhibitory concentrations, minimum bactericidal concentrations and time-kill assays. B. subtilis spore eradication was assessed via time-kill assays, with and without nutrient and non-nutrient germinant supplementation of photosensitizer, surfactant and photosensitizer-surfactant solutions in the presence and absence of light. RESULTS: Under red-light irradiation, >5-log10 colony-forming units/mL reduction of vegetative bacteria was achieved within 10 min with toluidine blue O (TBO) and methylene blue (MB). Cationic surfactant addition did not significantly enhance spore eradication by photosensitizers (P>0.05). However, addition of a nutrient germinant mixture to TBO achieved a 6-log10 reduction after 20 min of irradiation, while providing 1-2 log10 improvement in spore eradication for MB and pyronin Y. CONCLUSIONS: Light-activated photosensitizer solutions in the presence of surfactants and germination-promoting agents provide a highly effective method to eradicate dormant and vegetative bacteria. These solutions could provide a useful alternative to traditional chemical agents used for high-level decontamination and infection control within health care.

The effect of partial depopulation on Campylobacter introduction in broiler houses.

Poultry is seen as the main reservoir for Campylobacter. Control of this zoonotic pathogen in primary production could potentially reduce the colonization in broiler flocks and consequently reduce the number of human infections. In the present study, 20 broiler flocks from 10 farms, were sampled immediately before and 5 to 7 d after partial depopulation (thinning) for the presence of Campylobacter using cecal droppings and overshoes. At the time of thinning, the catching crew, transportation vehicles, forklift, and transport containers were sampled for the presence of Campylobacter. Samples were cultivated; presumed positive isolates were confirmed by PCR. The isolates were molecularly typed by flaA restriction analysis and pulsed field gel electrophoresis. Results show that all flocks were thinned using Campylobacter-contaminated equipment and materials. One-third of the broiler flocks became colonized after thinning. In 67% of the colonization cases, identical strains were found matching those of container systems, transport trucks, and/or forklifts. This identifies thinning as an important risk factor for Campylobacter introduction into broiler houses. Setup and compliance with biosecurity practices during thinning is essential to prevent Campylobacter colonization of broiler flocks.

Clonal dispersion of Acinetobacter baumannii in an intensive care unit designed to patients COVID-19.

INTRODUCTION: SARS-CoV2 pandemic marks the need to pay attention to bacterial pathogens that can complicate the hospital stay of patients in the intensive care unit (ICU). ESKAPE bacteria which includes Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter cloacae are considered the most important, because of their close relationship with the development of ventilator-associated pneumonia (VAP). The aim of this work was to identify and characterize ESKAPE bacteria and to detect their possible clonal spread in medical devices, patients, and medical personnel of the ICU for COVID-19 patients of the Hospital Juarez de Mexico. METHODOLOGY: Genetic identification of ESKAPE bacteria was performed by analyzing the 16S rRNA gene. Resistance assays were performed according to the CLSI guidelines. Assembly of AdeABCRS operon and inhibition assays of pumps efflux in Acinetobacter baumannii isolates were performed. Associated gene involved in biofilm formation (icaA) was performed in isolates belonging to the Staphylococcus genus. Finally, typing by ERIC-PCR and characterization of mobile genetic element SCCmec were done. RESULTS: Heterogeneous distribution of ESKAPE and non-ESKAPE bacteria was detected in various medical devices, patients, and medical personnel. Acinetobacter baumannii and Staphylococcus aureus were the predominant ESKAPE members. The analysis of intergenic regions revealed an important clonal distribution of A. baumannii (AdeABCRS+). Genotyping of SCCmec mobile genetic elements and the icaA gene showed that there is no clonal distribution of S. aureus. CONCLUSIONS: Clonal spread of A. baumannii (AdeABCRS+) highlights the importance of adopting good practices for equipment disinfection, surfaces and management of COVID-19 patients.

Strategies for antimicrobial peptide coatings on medical devices: a review and regulatory science perspective.

Indwelling and implanted medical devices are subject to contamination by microbial pathogens during surgery, insertion or injection, and ongoing use, often resulting in severe nosocomial infections. Antimicrobial peptides (AMPs) offer a promising alternative to conventional antibiotics to reduce the incidence of such infections, as they exhibit broad-spectrum antimicrobial activity against Gram-negative and Gram-positive bacteria, microbial biofilms, fungi, and viruses. In this review-perspective, we first provide an overview of the progress made in this field over the past decade with an emphasis on the local release of AMPs from implant surfaces and immobilization strategies for incorporating these agents into a wide range of medical device materials. We then provide a regulatory science perspective addressing the characterization and testing of AMP coatings based on the type of immobilization strategy used with a focus on the US market regulatory niche. Our goal is to help narrow the gulf between academic studies and preclinical testing, as well as to support a future literature base in order to develop the regulatory science of antimicrobial coatings.

Bacterial strains colonizing the sensor electrodes of a continuous glucose monitoring system in children with diabetes.

INTRODUCTION: The higher frequency of infections in diabetic patients is caused by a hyperglycemic environment, which promotes immune dysfunction. People with diabetes are more prone to skin infections. A continuous glucose monitoring (CGM) system provides information on changes in blood glucose (BG) levels throughout the day. Its use facilitates optimal therapeutic decisions for a diabetic patient. One of the factors limiting the use of CGM is inflammation at the insertion site. AIM OF THE STUDY: The aim of the study was the microbiological identification of the bacterial strains which are found on CGM sensor electrodes. MATERIAL AND METHODS: We performed microbiological tests on patients' CGM Enlite Medtronic electrodes, which were removed after 6 days of usage according to the manufacturer's instructions. 31 sensors were examined from 31 children (14 girls) aged from 0.5 to 14.6 years. The microbiological analysis was routinely performed at the Department of Children's Diabetology Medical University of Silesia in Katowice, Poland. RESULTS: 12 (39%) of the electrodes were colonized. In 11 (92%) cases the electrodes were colonized by one bacteria strain. 7 times methicillin-sensitive coagulase negative staphylococcus (MSCNS) was detected. We also found one case of Klebsiella pneumoniae, Ochrobactrum tritici, Bacillus sonorensis and methicillin-resistant coagulase-negative Staphylococci (MRCNS) colonization. One electrode was colonized by the mixed flora Enterococcus faecalis, methicillin-susceptible coagulase-negative Staphylococci (MSCNS), Pseudomonas stutzeri, methicillin-susceptible Staphylococcus aureus (MSSA). The median HbA1c in the group with colonization of electrodes was 6, 85% (6, 3-7, 6%) versus 6, 3% (5, 8-7, 5%) in the group without colonization. The median BMI in the group with colonization of the electrodes was 17.10 kg/m2 (16.28-18.62 kg/m2) versus 15.98 kg/m2 (15.14-17.96 kg/m2) in the group without colonization. Statistically, significantly more frequently electrodes are colonized in older children (median age in the group with colonization of electrodes 11.43 years (6.52-12.27 years), without colonization 8.42 years. (3.098-9.375 years); (p = 0.033). CONCLUSIONS: It seems that older children are more likely to have their sensor electrode colonized by bacterial strains.

Evaluating Candida albicans biofilm formation in silkworms.

Candida albicans is a pathogenic fungus that causes deep mycosis in immunocompromised patients and forms a biofilm on catheter surfaces. Here we showed that C. albicans infection of silkworms led to biofilm formation on the surface of polyurethane fibers, a catheter substrate material, while inside the silkworm body. Silkworms inserted with polyurethane fibers survived for at least 48 hours. When silkworms inserted with polyurethane fibers were subsequently infected with C. albicans, biofilm formed on the surface of the polyurethane fiber within 24 hours in the silkworm body. These results suggest that silkworms can be used to evaluate C. albicans biofilm formation.

The role of medical equipment in the spread of nosocomial infections: a cross-sectional study in four tertiary public health facilities in Uganda.

BACKGROUND: With many medical equipment in hospitals coming in direct contact with healthcare workers, patients, technicians, cleaners and sometimes care givers, it is important to pay close attention to their capacity in harboring potentially harmful pathogens. The goal of this study was to assess the role that medical equipment may potentially play in hospital acquired infections in four public health facilities in Uganda. METHODS: A cross-sectional study was conducted from December 2017 to January 2018 in four public health facilities in Uganda. Each piece of equipment from the neonatal department, imaging department or operating theatre were swabbed at three distinct points: a location in contact with the patient, a location in contact with the user, and a remote location unlikely to be contacted by either the patient or the user. The swabs were analyzed for bacterial growth using standard microbiological methods. Seventeen bacterial isolates were randomly selected and tested for susceptibility/resistance to common antibiotics. The data collected analyzed in STATA version 14. RESULTS: A total of 192 locations on 65 equipment were swabbed, with 60.4% of these locations testing positive (116/192). Nearly nine of ten equipment (57/65) tested positive for contamination in at least one location, and two out of three equipment (67.7%) tested positive in two or more locations. Of the 116 contaminated locations 52.6% were positive for Bacillus Species, 14.7% were positive for coagulase negative staphylococcus, 12.9% (15/116) were positive for E. coli, while all other bacterial species had a pooled prevalence of 19.8%. Interestingly, 55% of the remote locations were contaminated compared to 66% of the user contacted locations and 60% of the patient contacted locations. Further, 5/17 samples were resistant to at least three of the classes of antibiotics tested including penicillin, glycylcycline, tetracycline, trimethoprim sulfamethoxazole and urinary anti-infectives. CONCLUSION: These results provides strong support for strengthening overall disinfection/sterilization practices around medical equipment use in public health facilities in Uganda. There's also need for further research to make a direct link to the bacterial isolates identified and cases of infections recorded among patients in similar settings.

Measuring and reducing biofilm in mosquito rearing containers.

BACKGROUND: Mosquito rearing containers contain organic-rich water that nourishes numerous bacteria, some of which are capable of forming biofilms. Biofilm is broadly an extracellular polymeric matrix (EPS) in which living bacteria occur, and the accumulation of biofilm is possible during routine stock-keeping as most of these containers are re-used. Whether biofilm has an effect on the mosquito rearing is not a question that has been investigated, nor have measures to reduce biofilm in this context been systematically studied. METHODS: We measured biofilm accumulation in standard rearing containers by staining with crystal violet and determining the OD using a spectrophotometer. We also treated rearing containers with 0.1% sodium hypochlorite to determine its effectiveness in reducing biofilm abundance. Lastly, we performed an analysis of the relationship between the occurrence of biofilm and the likelihood of microbial blooms that were associated with larval death during trials of larval diets. RESULTS: We observed that soaking rearing containers overnight in 0.1% sodium hypochlorite greatly reduced biofilm, but we observed no relationship between the use of containers that had not been treated with bleach and subsequent microbial blooms. CONCLUSIONS: Larva rearing leaves detectable biofilm. While we were unable to correlate microbial blooms with the presence of biofilm, as a precaution, we recommend that plastic containers that are re-used be treated with 0.1% sodium hypochlorite occasionally.

[Multidrug Resistant Organisms (MDRO) in Rehabilitation: Prevalence and Risk Factors for MRGN and VRE]. / Multiresistente Erreger (MRE) in der Rehabilitation: Prävalenz und Risikofaktoren für MRGN und VRE.

BACKGROUND: After a first large-scale study on multi-drug resistant organisms (MDRO) in rehabilitation facilities in 2014, the Rhine-Main network on MDRO carried out another investigation in 2019. With regard to the recently published KRINKO recommendations on multidrug resistant enterococci, now vancomycin -resistant enterococci (VRE) and multi-drug resistant gram-negative pathogens (3MRGN and 4MRGN, i. e. gramnegative organisms resistant against 3 resp. 4 groups of antiinfectiva) were investigated. MATERIAL AND METHODS: A total of 16 hospitals took part, including one clinic for early neurological rehabilitation (ENR). Patient participation was voluntary. Rectal swabs were analyzed in a medical-microbiological laboratory (certified according to DIN ISO 15189) using standard methods (including MALDI-TOF-MS and VITEK 2 resistance testing according to EUCAST). By using the standardized questionnaire of the Europe-wide HALT examination (healthcare associated infections in long-term care facilities), patient characteristics (age, gender, hospital, surgical and MDRO medical history, Medical devices, current antibiotic therapy etc.) were collected. RESULTS: 928 patients took part in the study, 895 from general rehabilitation facilities (GR) and 33 from early neurological rehabilitation (ENR). 65% of GR patients (ENR 100%) had been hospitalized in the previous 6 months, 29% (ENR 100%) of the patients had been admitted directly from a hospital, 22% (ENR 64%) had received antibiotic therapy in the last 3 months. Medical devices were rarely used in GR patients with 1% overall, but often in the ENR with 61% urinary catheters and 36% vascular catheters. 2.2% (ENR 33.3%) of GR patients were colonized with VRE and 6.7% (ENR 18.2%) with 3MRGN; one patient exhibited a 4MRGN (ENR 0). DISCUSSION: Compared to our previous study, there were no significant changes in the patient characteristics. The VRE prevalence was low at 3.3%, the prevalence of 3MRGN was higher compared to 2014 (7.1% vs. 3.6%). Risk factors for VRE and 3MRGN colonization (significant increased odds ratio) were: history of hospital treatment and an increased need for care due to restricted mobility, incontinence and disorientation. In addition, previous antibiotic treatment and skin barrier injuries due to Medical devices or wounds were detected as further risk factors for VRE colonization.

Successful disinfection of trumpet mouthpieces using domestic steam disinfection.

There have been numerous reports in the literature describing the diversity of microbial flora isolated from woodwind and brass instruments, with potential infection risks for players, especially when such instruments are shared. Steam disinfection has become established as a trusted method of decontamination; however, there have been no reports on the employment of this technology to disinfect parts of musical instruments, hence it was the aim of this study to examine the fate of bacterial and yeast pathogens on artificially contaminated trumpet mouthpieces and to evaluate whether such disinfection is an effective method of disinfection for such instrument parts. Trumpet mouthpieces were artificially contaminated with 18 microbial strains (17 bacteria from four genera (Enterococcus, Escherichia, Staphylococcus and Streptococcus) and one yeast (Candida)), each at an inoculum density of approximately 1·5 × 107 colony forming units and subjected to a disinfection cycle. The experiment was repeated including 50% (v/v) sterile sputum as soil. No bacteria or yeast organisms were recovered post disinfection, including following recovery and with nonselective cultural enrichment techniques.

Making medical devices safer: impact of plastic and silicone oil on microbial biofilm formation.

BACKGROUND: Medical devices face the challenge of microbial biofilm attached to the surface. Ultimately, this may jeopardize the function of the device and increase the patient's risk of infection. However, reliable methods to prevent biofilm are lacking. AIM: To investigate the effect of silicone oil-coated polypropylene plastic, used in a new automatic urinometer, on biofilm formation; furthermore, to explore the impact of silicone oil viscosity and compare polypropylene with polystyrene, another common medical plastic. METHODS: Common pathogens, including extended-spectrum beta lactamase (ESBL) -producing and multi-drug-resistant bacteria, as well as Candida albicans, were investigated. Isogenic Escherichia coli strains deficient in the important biofilm forming factors curli, cellulose and type 1 fimbriae (fim D) were used to determine the possible mode of action by silicone oil. Clear flat-bottomed polypropylene or polystyrene wells were pretreated with either low- or medium-viscosity silicone oil and microbes were added. After 72 h, biofilm formation was quantified using crystal violet assay. FINDINGS: Silicone oil-coated polypropylene plastic surfaces, regardless of the oil viscosity, significantly inhibited biofilm formation of all tested Gram-negative and Gram-positive bacteria, including ESBL-producing and multi-drug resistant strains, as well as C. albicans. Silicone oil did not affect bacterial or candida growth and curli fimbriae were found to be the main target of silicone oil. Polypropylene plastic itself without oil had a better effect in preventing biofilm formation than polystyrene. CONCLUSION: These findings suggest a new strategy to decrease microbial biofilm formation, which may reduce hospital-acquired infections and prevent dysfunction of medical devices.

Fabrication of antibacterial sponge cleaner using gold nanoclusters.

From the dinner table to the office, many surfaces contain bacteria and the threat to human health. In this work, cost-effective antimicrobial foams were developed by the adsorption of lysozyme protected gold nanoclusters (AuNCs) in sponges. Antibacterial activities of the prepared antibacterial AuNCs were evaluated using typical Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Staphylococcus aureus). The antibacterial foams were further fabricated by the absorption of the positively charged AuNCs in the negatively charged sponges. The inhibitions of bacteria on random surfaces, such as mobile phones, tables, doorknobs, and cabinet handles, were exhibited by cleaning them with the antibacterial foams.